I have decided to change my approach: Writing the post before shooting the third “PinePhone as a daily driver” video. This week is going to be about Flatpak, Reading apps and the intricacies of running (non-)Flatpak Qt and GTK apps on the respective “other side”. Part 1: Flatpak and Scaling in Phosh.
Caveat: For the past week I have been struggling with receiving calls on Phosh/ModemManager based distributions, approximately since the massive improvements in battery life due to new Crust firmware. I found another user suffering from this issue, but assuming my tweets are being read among PinePhone users, it does not seem to be a widespread problem. I am continuing with this series despite of these issues, but be aware that core functionality might be currently not available.
- Flatpaks across PinePhone distributions
- Manual Scaling in Phosh
Flatpaks across PinePhone distributions
As many of the apps I will discuss later on are first and foremosts available as Flatpaks, let’s dive into tutorial territory on how to install flatpaks. The first part of this is specific for your distribution:
I switched my eMMC OS to postmarketOS this week, using one of their images that include their installer.
If you are using Phosh, get Flatpak support by typing
sudo apk add gnome-software-plugin-flatpak,
if you insist on running Plasma Mobile despite its early state run
sudo apk add discover-backend-flatpak instead. If you don’t want Flatpak in your software center or you are among those, that just run another window manager, e.g. sway, just run
sudo apk add flatpak.
Arch and Manjaro
sudo pacman -Syu flatpak gets you bare minimum flatpak support here. Arch does not come with sudo enabled by default, therefore a
su and then a
pacman -Syu flatpak should get the job done.
Mobian / PureOS port
sudo apt install flatpak for basic flatpak support, and
sudo apt install gnome-software-plugin-flatpak (which depends on flatpak, so running this should be enough) gets you Flatpak support in Gnome Software Center.
Just having Flatpak does not help you much. Flathub contains many mobile optimized and other apps, that may work with
scale-to-fit. Just run
sudo flatpak remote-add --if-not-exists flathub https://flathub.org/repo/flathub.flatpakrepo (or without the sudo, if you are root) and you will have Flathub and all its software available for installation.
If you want to install the software from the Gnome Software Center or Discover, and it does not work yet, try a reboot.
Enabling other Flathub repositories, e.g. KDE Apps
flatpak remote-add --if-not-exists kdeapps --from https://distribute.kde.org/kdeapps.flatpakrepo as root.
Tradeoffs of using flatpak apps
Flatpaks have caused some controversy in the Linux community, and their security model has been questioned. These quarrels aside, you need to know that using just a few Flatpaks will take a ton of disk space on your phone, as all the foundations for the app will be loaded with them — just don’t use them on a 4GB or 8GB SDHC card. Also, as the base flatpaks need to be downloaded and updated, you should have enough bandwith. Unless your mobile data plan is truly unlimited, download them over a non-metered connection.
Now that you have been warned, installing Flatpaks is simple. You can do so from Gnome Software or Discover, or just by running
flatpak install appname. You do not need to know the exact name,
flatpak will figure it out and let you choose between options, if there is more than one Flatpak matching your query. Just try it, it’s simple!
Exercise: Installing the Cawbird twitter client
Cawbird is a nice GTK-based Twitter client, that works on the PinePhone, but does not scale perfectly by default.
flatpak install cawbird and hit Enter
Looking for matches… Found similar ref(s) for ‘cawbird’ in remote ‘flathub’ (system). Use this remote? [Y/n]: Found ref ‘app/uk.co.ibboard.cawbird/aarch64/stable’ in remote ‘flathub’ (system). Use this ref? [Y/n]:
It really is simple, you just have to read and press Enter if you agree.
Manual Scaling in Phosh
Now that we have installed an app, it may happen that it does not scale correctly. Cawbird is one of these apps that almost works out of the box and after telling Phosh to scale it properly, is just fine.
Newer Phosh distributions come with a command called
scale-to-fit. It’s used like this:
$ scale-to-fit <APP-ID> on. For Cawbird it is simple: Just
$ scale-to-fit cawbird on, as is documented on the Mobian Wiki. But let’s assume we did not know it — and you will eventually run into this — how can we simply find out the APP-ID?
The method on the Mobian Wiki works, but it is clunky. Yesterday I scrolled through the blog of Phoshs main developer/release manager, and took what I found there to come up with the following simple bash-script:
#!/bin/bash WAYLAND_DEBUG=1 $1 |& grep 'xdg_toplevel@[0-9]\+\.set_app_id'
Just copy these two lines into a text file, e.g. named
get-app-id.sh, on your PinePhone and make it executable by running
$ chmod +x get-app-id.sh.
Let’s say, you want to use KeePassXC, which does not scale well, but becomes somewhat usable by running
scale-to-fit. But you won’t get there by running
$ scale-to-fit keepassxc on. You can now run
$ ./get-app-id.sh keepassxc and KeePassXC will start up. Go back to your terminal and you will find a line of text similar to:
[4049990.198] -> email@example.com_app_id("org.keepassxc.KeePassXC")
The part between the “” is what you are looking for. Just run
$ scale-to-fit org.keepassxc.KeePassXC and the next time you start KeePassXC, it should be usable.
The same works for Flatpak apps. You will just need to find out the Flatpaks Application ID, which is possible by performing
$ flatpak search ..., or for Flathub apps by just looking at the flathub.org webpage for the specific app you want to adjust, e.g.
https://flathub.org/apps/details/uk.co.ibboard.cawbird, where uk.co.ibboard.cawbird is what you need.
Now you can just run a
$ ./get-app-id.sh "flatpak run uk.co.ibboard.cawbird" and that will return the APP-ID you are looking for:
[536137.138] -> firstname.lastname@example.org_app_id("cawbird")
Addition (07/27/2020, 8:14pm CEST): There is another way to get the APP-ID that has been pointed out to me by Twitter user @dos1:
examples/foreign-toplevel.cfrom wlroots source tree and you’ll get a tool that lists you app-ids of open windows :P
This approach requires more effort once and then a lot less effort going forward. Choose wisely!